Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 15)

11
Routing Sources
1 Press the Select button to display the routing screen.
2 Use the ◄ or ► buttons to select the display that will receive the source signal.
3 Press the Select button to confirm the output selection. Otherwise, press the Cancel
button.
4 Use the ◄ or ► buttons to select the desired source to be routed to the display,
which was selected in Step 2.
5 Press the Select button to confirm the output selection. Otherwise, press the Cancel
button.
6 Press the Cancel button to return to the Standby screen.
OUTPUT: 01
INPUT: 01
>
Select button
OPERATING THE 16X16 DVI MATRIX
OUTPUT: 01
INPUT: 14
>