beautypg.com

Rs-232 / telnet / udp commands – Gefen DVI MATRIX EXT-DVI-16416 User Manual

Page 42

background image

38

RS-232 / TELNET / UDP COMMANDS

#set_output_name Command
The #set_output_name command provides a name to the selected output. For example,

“Output 1” could be renamed as “HDDisplay”. The maximum string length for param2 is

15 characters. Special characters and spaces are not permitted. If required, use the

underscore character (“_”) to separate characters.

Syntax:
#set_output_name param1 param2

Parameters:
param1

Output

[1 ... 16]

param2

Name

Example:
#set_output_name 3 display_3
display_3 is assigned to output 3

#show_temp Command
The #show_temp command displays the board temperatures to the screen.

Syntax:
#show_temp

Parameters:
None

Example:
#show_temp
Temperature near cross point top side is 50

Temperature near cross point bottom side is 44 C degree

Temperature on input board is 43 C degree