beautypg.com

Rs-232 / telnet / udp commands – Gefen DVI MATRIX EXT-DVI-16416 User Manual

Page 27

background image

23

RS-232 / TELNET / UDP COMMANDS

#ipconfig Command
The #ipconfig command displays all TCP/IP settings on the matrix.

Syntax:
#ipconfig

Parameters:
None

Example:
#ipconfig

-------------- TCP/IP settings -------------

MAC add = 00:1C:91:01:01:01
IP add = 192.168.1.72
Net Mask = 255.255.255.0
Gateway = 192.168.1.254
Web Server Port = 80
TCP Terminal Server Port = 23
TCP Terminal password at login is set to ON
UDP Server Port = 25665
UDP Remote IP = 110.0.255.255
UDP Remote Port = 26989
UDP Access = Disabled

#resetip Command
The #resetip command resets all TCP/IP settings to factory defaults.

Syntax:
#resetip

Parameters:
None

Notes:

The matrix must be rebooted after executing this command.

See also other documents in the category Gefen Computer Accessories: