Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 23)

19
RS-232 / TELNET / UDP COMMANDS
#ediddstoba Command
The #ededdstoba command reads the downstream EDID and stores it to a
specified EDID bank.
Syntax:
#ediddstoba param1 param2
Parameters:
param1
A downstream monitor [1 ... 16]
param2 EDID bank offset [1 ... 3]
#ediddstolo Command
The #ediddstolo command reads the downstream EDID and stores it to a Local EDID input.
Syntax:
#ediddstolo param1 param2 [param3...param9]
Parameters:
param1
A downstream monitor [1 ... 16]
param2 Input list [1 ... 16]
Notes:
If param2 = 0, then the downstream EDID is stored to all 16 DVI inputs. If more than eight
inputs need to be specified in order to receive the downstream EDID,
the #ediddstolo command must be executed twice.
Example:
#ediddstolo 2 1 2 3 4 5 6 7 8 9 10 11 (not permitted!)
Instead, run the function twice:
#ediddstolo 2 1 2 3 4 5 6 7 8 9
#ediddstolo 2 10 11