beautypg.com

Rs-232 / telnet / udp commands – Gefen DVI MATRIX EXT-DVI-16416 User Manual

Page 22

background image

18

RS-232 / TELNET / UDP COMMANDS

#edidbatolo Command
The #edidbatolo command reads the downstream EDID and stores it to any local input.

Syntax:
#edidbatolo param1 param2 [param3...param9]

Parameters:
param1

EDID bank offset

[1 ... 5]

param2

Input

[1 ... 16]

Notes:
If param2 = 0, then the EDID in the specified bank is copied to all eight inputs.

#ediddetolo Command
The #ediddetolo command stores the Default EDID (640x480) in the specified Local EDID

inputs.

Syntax:
#ediddetolo param1 param2 param3...param9
param1

Input

[1 ... 16]

Notes:
If param1 = 0, then all 16 DVI inputs will be set to the Default EDID.

See also other documents in the category Gefen Computer Accessories: