Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 21)

17
RS-232 / TELNET / UDP COMMANDS
EDID Management
Command Description
#dynamic_edid Enables / disables dynamic EDID
#edidbatolo Read downstream EDID and stores in any Local Input
#ediddetolo Sets Local EDID to Default EDID
#ediddstoba Read downstream EDID and stores in EDID Bank
#ediddstolo Read downstream EDID and stores into a Local EDID
#lock_edid Secures Local EDID
#prbaedid Read EDID from an EDID bank and sends to serial port
#prdsedid Read downstream EDID and sends to serial port
#predidst Prints EDID details
#prloedid Read Input Local EDID and sends to serial port
#dynamic_edid Command
The #dynamic_edid command provides the ability to route any downstream EDID to any
input. When enabled, the EDID is copied to all inputs from the last selected active output.
When disabled, the EDID is copied to all inputs from the first active display detected, start-
ing from Output 1.
Syntax:
#dynamic_edid param1
Parameters:
param1
Value [0 - 1]
Value Meaning
0 Disable
1 Enable
Default:
Disabled