Garmin HN294DP/DI User Manual
Page 63
Advanced Configuration
EN/LZT 108 6377 R4 - September 2003
57
selected:
4. Fill in the parameters according to information from your ISP/service
provider and click the Apply button.
5. Select System > Save Configuration and click the Save button to
save your new settings.
The parameters for creating a new ATM PVC Interface are described
below. Note that not all parameters are shown for all Data Modes.
Parameter
Description
ATM Properties
VPI
Identifies the VPI (Virtual Path Identifier). The valid
range is from 0 to 255.