Garmin HN294DP/DI - Manual (Page 36)

Advanced Configuration
30 EN/LZT 108 6377 R4 - September 2003
9 Advanced Configuration
9.1 Introduction
The HN294 offers the possibility for advanced users to set up special
network scenarios themselves or to modify the existing ones.
TIP: For advanced network scenarios, use the Configuration Wizard and
select the ADSL-mode that is closest to your requirements and then modify
it to meet your needs. This is easier than creating a complete new profile.
9.2 Access the Web Manager
Follow the steps below to access the built-in Configuration tool and the
Web Manager including web pages for advanced configuration.
NOTE! By default, the built-in web pages are only accessible from
your LAN/WLAN computer(s). Refer to the “Status” chapter for
instructions on how to change settings to allow remote access.
1. Start your web browser and type 192.168.0.1 (the private IP
address for the HN294d) in the URL field and press Enter.
2. To access the Configuration tool you have to login and the following
window is displayed: