Garmin HN294DP/DI - Manual (Page 39)

Advanced Configuration
EN/LZT 108 6377 R4 - September 2003 33
1. Click the Connect button in the “Action” column. The following page
appears:
2. Enter the User Name and Password provided by your ISP and
click on the Connect button.
3. Once the connection is successfully established you will return to
the Overview page where you can keep track on the “On-Line
Time”.
Disconnect:
1. Click the Disconnect button in the “Action” column. The following
page appears:
2. Click the Disconnect button.
3. Once the connection is disconnected you will return to the Overview
page where the counter for “On-Line Time” will stop and be reset.
NOTE! On the Configuration > WAN (modify) page you can select
to automatically disconnect if no traffic is detected for a specific
period (minutes). If outbound traffic is detected when the HN294d is
disconnected, it will automatically connect again.