Garmin HN294DP/DI - Manual (Page 14)

Hardware Description and Installation
8 EN/LZT 108 6377 R4 - September 2003
POWER button – To power ON/OFF your HN294d.
PWR – The PWR socket is used for connecting the supplied power
supply adapter.
2.3 Choose a Place for the Router
The HN294d can be mounted on the wall or simply placed on a flat surface.
NOTE! Proper ventilation is necessary to prevent the product from
over-heating. Do not block or cover the slots and openings on the
device, which are intended for ventilation and proper operation.
In a wireless configuration the HN294d is designed to reach 50-100 meters
indoors and up to 300 meters outdoors. When choosing a location for your
router, keep in mind that the number, thickness and location of walls,
ceilings or other objects that the wireless signal must pass through may
limit the range. Also keep the HN294d away from equipment that might
disturb the signal, such as Bluetooth devices, microwave ovens and 2.4
GHz cordless phones.
If you choose to wall mount the router, use two screws and two of the
mounting slots on the bottom of the unit as shown in the illustrations below:
Figure 3 - Wall mounting of the HN294d
Note that the transparent top cover can be rotated to ensure that the logo is
correctly positioned for various mounting positions.