beautypg.com

Garmin HN294DP/DI User Manual

Page 54

background image

Advanced Configuration

48

EN/LZT 108 6377 R4 - September 2003

9.6.2.2 DHCP

Server

The Configuration > LAN > DHCP Server page allows you to configure
the built-in DHCP Server.

The HN294d incorporates a DHCP (Dynamic Host Configuration Protocol)
server, which dynamically assigns IP addresses and serves as a DNS
server to the PCs on the LAN/WLAN. DHCP functionality spares you the
hassle of manually assigning a fixed IP address to each PC on the
LAN/WLAN.

NOTE! By default the DHCP Server is enabled on the private LAN
interface (192.168.0.1) but if you already have a DHCP server on
your network, you should disable this function.

Enable and configure the DHCP server:

Select the Enabled radio button and click the Configure button. The
following page appears: