Garmin HN294DP/DI - Manual (Page 44)

Advanced Configuration
38 EN/LZT 108 6377 R4 - September 2003
4. When the restoring is completed the following window appears:
5. Click the Save button to save the configuration (otherwise the new
settings are only valid until next reboot).
9.4.4 Save Configuration
From the System > Save Configuration page you can save all current
configuration to non-volatile memory.
All settings you apply on the pages in the Web Manager will take effect
immediately, but once you restart or turn off your HN294d the changes will
be discarded. If you want the settings to remain in effect even after the
current session, you must click the Save button on this page.
9.4.5 Upgrade Firmware
From the System > Upgrade Firmware page you can upgrade the
firmware in the HN294d.