Garmin HN294DP/DI - Manual (Page 17)

Hardware Description and Installation
EN/LZT 108 6377 R4 - September 2003 11
The LAN and/or USB LED(s) turn On indicating a proper
connection to either a Ethernet NIC or a USB port.
5. Now, the HN294d must be configured for your specific ADSL mode
and other settings. This is described in chapter 3 – “Initial
Configuration”.
2.4.2.1 Install USB Drivers
NOTE! This should only be done if you have connected a computer
via the USB interface.
For USB connection you need to install USB drivers to your PC. Follow the
instructions below to install USB drivers and connect the HN294d to the
USB interface.
1. Close ALL Windows applications and insert the provided “Drivers &
Documentation” CD into your CD-ROM drive.
2. The CD starts automatically and the following Welcome page is
displayed:
NOTE! If Autorun does not start, select Start > Run…, type
D:\startup.exe (where D: is the letter of your CD-ROM drive) and
press Enter.