Garmin HN294DP/DI - Manual (Page 41)

Advanced Configuration
EN/LZT 108 6377 R4 - September 2003 35
To change the default User Name and/or Password, just type your new
information in the fields. If you only want to change the password, keep
admin in the “User Name” field and type your new password (in both
fields).
Confirm by clicking the Apply button. The login window then appears and
you are prompted to make a new login with your new User Name and/or
Password.
9.4.2.2 Remote Management
On the System > Administration > Remote Management page you can
manage remote client access to the HN294d from the WAN.
To enable/disable remote access proceed as follows:
1. Enter an appropriate access time in the Allow access for: field.
This is recommended if you want to temporarily enable remote
access for another user.