beautypg.com

Post failure logs – Gateway E-826R User Manual

Page 99

background image

Appendix A: Logs

www.gateway.com

94

POST failure logs

These events indicate that the autoloader or tape drive detected a failure when
power was applied. POST may have failed during a reset and retry.

Important

This event type only indicates each time

the test ran and experienced the error

condition.

:

11/00

Unrecoverable Read Error. After
exhausting the read recovery algorithms,
the drive was not able to read the data
correctly.

Problem may be the tape cartridge or the drive.
If the problem continues, contact customer support.

14/00

Entity Not Found. A logical block that was
written on the tape was not found while
trying to read the data.

Problem may be the tape cartridge or the drive. Check drive
logs to correlate events that may have led up to this
condition.
If the problem continues, contact customer support.

47/00

SCSI Parity Error. SCSI bus
communications problem.

Check SCSI cables, terminators, and all devices attached to
the SCSI bus.

80/01

Cleaning Required

. The drive has

detected a condition in which a cleaning
tape must be used.

Use a cleaning tape or different media. Check drive logs to
review related events. If this persists with multiple media
after cleaning, the drive may need to be replaced. If related
to a single piece of media, replace that tape cartridge.
If the problem continues, contact customer support.

ASC/ASCQ

Description

Suggested Action

Field

Description

Last Fail

The type of failure that was experienced.

This manual is related to the following products: