Gateway E-826R - Manual (Page 80)

Checking for errors www.gateway.com
75
These errors appear on the LCD screen.
Error code field description
Error codes appear as 8-character strings made up of either letters or numbers
for a total of 32 bits. The following table shows the block descriptor for the Hard
Error log codes.
Field Description
Time Stamp The time the event occurred. This field helps
correlate the event with a possible
application interruption. If the autoloader is
unable to acquire the correct time/date from
the SNTP time server, or the front panel, the
time stamp contains values indicating the
power cycle number and the time an entry
was written relative to that power cycle,
listed as Power On Hours (POH).
The autoloader has no internal real-time
clock and requires the user to set the time of
day from the front panel or the network
interface (SNTP).
Error Code The type of error and action to which the
event is related. This field helps identify what
caused the event to occur.
Context The event’s software register information.
Bit Description
0–3 Error Location
4–7 Error Location
8–11 Error Location
12–15 Error Location
16–19 Error Type
20–23 Error Type
24–27 Task ID
28–29 Task ID
30–31 Recovery Action