beautypg.com

Gateway E-826R User Manual

Page 28

background image

Installation

www.gateway.com

23

5

Click Scan for Hardware Changes. Windows 2003 scans for the
SuperLoader 3 drive. The drive appears under ? Other Devices again.

6

Right-click the appropriate listing, then click Properties.

7

Select the Driver tab, then click Update Driver.

8

When the Upgrade Device Driver Wizard appears, click Next.

9

Click Display a list..., then click Next.

10

Scroll down and click Tape Drive, then click Next.

11

Select the appropriate directory for your drive.

12

Click the SuperLoader 3 (drive) entry, then click Next.

13

Click Next to install the driver.

14

Click Finish.

15

Click Device Properties to make sure that the driver has been installed.

The drive now appears in Device Manager under Tape Drives as a (drive
type
) SCSI Sequential Device and is ready to use.

Autoloader device driver

To install the autoloader device driver for Microsoft Windows 2003:

1

Make sure that you are logged on to the host server with administrator
privileges.

Important

The autoloader uses the SuperLoader 3

Windows drivers.

2

Download the latest drivers from

support.gateway.com

. Save the drivers

to your host computer.

3

Right-click the My Computer icon on the Windows desktop, then click
Manage, Device Manager.

The autoloader should be listed under Medium Changers as Unknown
Medium Changer Device
.

4

Right-click the Unknown Medium Changer Device listing, click
Uninstall, then click OK to confirm that you want to remove the device.

5

Click Action in the upper-left corner of the Computer Management dialog
box.

6

Click Scan for Hardware Changes.

Windows 2003 scans for the autoloader. The autoloader appears under
Medium Changers again.

7

Right-click the Unknown Medium Changer Device listing, then click
Properties.

8

Select the Driver tab.

9

When the Upgrade Device Driver Wizard appears, click Next.

10

Click Display a list..., then click Next.

This manual is related to the following products: