Connecting the scsi and power cables, Connecting the scsi and – Gateway E-826R User Manual
Page 25

Chapter 2: Installing and Setting Up your Autoloader
www.gateway.com
20
Connecting the SCSI and power cables
To connect the SCSI and power cables:
1
Shut down and turn off the selected server. Turn off all attached accessory
devices, such as printers and other SCSI devices.
2
Attach one end of the SCSI cable (included in the accessory kit) to one of
the connectors on the back panel of the autoloader.
The chassis mounted
on a rack.
Using long
autoloader brackets.
Using short
autoloader brackets.
Back view of
mounted chassis.
This manual is related to the following products: