GarrettCom 6K32 User Manual

Page 36

Magnum 6K32 Managed Switch Installation and User Guide (02/05)

www GarrettCom com

Step 3. The figure here illustrates the basic layout of an individual PM card. 6KPM

card fits into the space provided on the main board over the grand-daughter Bd. and the

male latched cream color connector( as shown in above fig. with arrow mark).

Fig 3.5.2d: Daughter Board shown upside down with two male latch connectors

Fig 3.5.2e Daughter

Bd. Being placed

over the Grand

daughter Bd. and the

mating connector

being matched to

lockup properly

Step 4. Hold the daughter board with both hands at the end and align the two cream

color latching connectors (male) placed at the bottom of the daughter board

with the other female connector placed on the Granddaughter and main board.

As shown above in Fig. 3.5.2e

Step 5. Once the latching connectors are aligned properly and the mounting holes are

aligned with stand offs then press slowly and firmly with two fingers (as shown

below in Fig.

3.5.2f) on the top

of the latching

connectors until the

connectors latched

up securely.

Fig.3.5.2f:

Securely latching up 6KPM Cards into a Magnum 6K32