Grizzly G0503 - Manual (Page 23)

Model G0503 (Mfg. Since 12/08) -21-
positioning the
control panel
Tools Needed Qty
hex wrench 8mm ............................................ 1
To mount the control panel:
1. unwrap the protective covering from the con-
trol panel and support arm.
2. place the control panel support arm into the
mounting bracket as shown in figure 14.
figure 14. Control panel assembly.
figure 15. Control panel positioning.
3. position the control panel for easy access,
as shown in figure 15, and tighten the cap
screws shown in figure 14.
Cap screw
Cap screw
Mounting
Bracket
Mounting the
Return Rollers
Tools Needed Qty
wrench/socket 17mm ...................................... 1
To mount the return rollers:
1. remove all four bolts shown in figure 16.
figure 16. return roller mounting bolts.
figure 17. return roller placement.
2. get assistance and lift the rollers into the
position shown in figure 17.
3. thread the bolts with washers through the
return roller holes and into the resaw.