Grizzly G0503 - Manual (Page 16)

Model G0503 (Mfg. Since 12/08) -14-
SEcTION 3: SET up
the Model g0503 left our warehouse in a care-
fully built crate. if you discover the machine is
damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
save the containers and all packing materials
for possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
when you are completely satisfied with the con-
dition of your shipment, you should inventory the
equipment from the shipping crate.
the purpose of this section is to guide you
through the required steps to get your machine
out of its crate and into operating condition.
Wear safety glasses
during the entire set up
process!
This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations before start-
ing the machine!
figure 5. piece inventory.
piece Inventory
unpacking
About this Section
The inventory of the shipping crate includes:
•
resaw......................................................... 1
• Bandsaw Blade 168" x 1" x 0.035" ............. 1
• handwheel handle ..................................... 1
• Blade Cover ................................................ 1
• tool Box...................................................... 1
• wrench set—10, 12, 13, 14, 17, 19, 21mm ...
• hex wrench set—2.5, 3, 4, 5, 6, 8, 10mm ..
• open End wrench—35mm ........................ 1
• t-handle wrench ....................................... 1
• phillips head screwdriver........................... 1
• Flat head screwdriver ................................ 1
• pry tool ...................................................... 1
• Bolt Bag
—Carriage Bolt M10-1.5 x 30 ..................... 6
—Flat washer 10MM ................................. 6
—lock nut M10-1.5 .................................... 6
—Carriage Bolt M6-1.0 x 16 ....................... 4
—Flat washer 6MM ................................... 4
—lock nut M6-1.0...................................... 4
in the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.