Additional usb jacks – Gateway XHD3000 User Manual
Page 27
www.gateway.com
21
3
Connect the included USB cable to the USB-B port on the
back of the monitor, then connect the other end of the
cable to a USB-A (standard) port on your computer.
Additional USB jacks
Additional USB jacks are located on the left side of the monitor.
Important
Only the computer and monitor should be connected during the
first installation and bootup. Do not plug any devices into the USB-A ports
at this time. After the USB driver is installed, it is safe to plug additional
devices into the monitor’s USB hub.
USB-B port (connect to computer)
USB-A hub ports
USB -A ports
8512322_XHD3000 Usr Gde.book Page 21 Friday, August 10, 2007 12:33 PM