Connecting the usb hub – Gateway XHD3000 User Manual
Page 26
CHAPTER 2: Setting Up Your Monitor
20
4
Plug the speaker bar’s power and audio plugs into the
appropriate connectors underneath the monitor.
For information on using the speaker bar, see
Connecting the USB hub
Your monitor has a built-in, powered, USB 2.0 6-port hub. When
connected to your computer’s USB port, the hub provides six
USB ports for connecting as many as six USB-compatible
devices.
To connect the USB hub:
1
Turn on your computer, then install the EzTune software
from the included EzTune installation CD.
2
Position your monitor so you can reach the back.
Important
For the monitor’s USB hub to provide high-speed USB 2.0 connections, the
hub must be connected to a USB 2.0 port on your computer. If the hub is
connected to a USB 1.1 port, the monitor’s ports will provide only the slower
USB 1.1 connections.
Important
This monitor requires a driver to work correctly. The driver is included on
the EzTune installation CD.
Speaker bar power
Speaker bar audio
8512322_XHD3000 Usr Gde.book Page 20 Friday, August 10, 2007 12:33 PM