Gateway XHD3000 - Manual (Page 25)

www.gateway.com
19
2 Touch (Main Menu), (Advanced),
(Integrated Product Tour), then touch (Disable).
The product tour is disabled.
After the tour is disabled, you can view it again at any
time by pressing and holding the power button for five
seconds.
For more information on using the touch buttons, see
“Using the EzTouch menu” on page 29 .
Setting up the optional speaker bar
An optional speaker bar, which has excellent sound, is available
for mounting underneath your monitor. You can order a
speaker bar from
www.gateway.com .
To install the speaker bar:
1 Turn off the monitor.
2 Remove the three thumbscrews from the back of the
monitor.
3 Slide the speaker bar onto the bottom of the monitor,
then use the three thumbscrews to secure it into place.
Important
If you connect the speaker bar to the monitor while the monitor
is turned on, the speaker bar will not initialize and will not work correctly.
If this happens, turn the monitor off, then back on to enable the speaker
bar.
Thumbscrews
8512322_XHD3000 Usr Gde.book Page 19 Friday, August 10, 2007 12:33 PM