Fostex D-160 - Manual (Page 183)

D-160 Owner's Manual (MMC/FEX List/Maintenance/Specifications)
183
14 07 (): Fs rate set command
The command for setting the current program fs (sampling frequency) at the figure
indicated by .
14 08 (): Time base set command
The command for setting the current program time base of this equipment to that indicated
by .
The Status Request Command
22 21: loop operation status request
The command inquiring the loop operation mode setup status.
D-160 will reply with "32 21 ()."
22 22: loop on/off status request
The command inquiring the loop on/off (=ON/OFF of AUTO RETURN) setup status.
D-160 will reply with "32 22 ()."
22 28: post locate status request
The command inquiring the post locate mode (ON/OFF of AUTO PLAY) setup status.
D-160 will reply with "32 28 ()".
22 2D: auto rec status request
The command inquiring the auto rec mode setup status and this is replied by "32 2D
()." Reply from D-160 against this status request will be either one of the
following:
=05: Possible to undo rehearsal mode.
=06: Possible to undo take mode.
=72: off
22 41: lock status request
The command inquiring the slave on/off setup status and the lock status.
D-160 will reply with "32 41 ()."
22 42 : lock mode status request
The command for inquiring the lock mode setup status and this is replied with "32 42
."
22 45: copy clip status request
The command inquiring the clipboard condition. If there is a copy paste data in the
clipboard, D-160 will reply with "32 45 ()." If data in the clipboard is
for move paste or there is no valid data in it, it will reply will "32 45 ((void data)>)."
22 46: copy paste status request
The command inquiring execution status of copy paste editing.
When this command is received, D-160 will reply with either "32 46 (
)" or "32 46 ()." indicates unprocessed time
until completion.
22 47: erase status request
The command inquiring execution status of erase.
When this command is received, D-160 will reply by either "32 47 (
)" or "32 47 ()." indicates unprocessed time
until completion.