Fortinet Version 3.0 - Manual (Page 36)

FortiBridge Version 3.0 Administration Guide
36 09-30000-0163-20061109
Configuring FortiBridge probes Configuration and operating procedures
Figure 13: Example FortiBridge application
Table 9 lists the internal network configuration.
Table 10 lists the basic FortiBridge unit configuration settings.
Configuring FortiBridge probes
To monitor a FortiGate unit for failure, you configure the FortiBridge unit to send
probe packets through the FortiGate unit. Using probe packets, the FortiBridge
unit can confirm that the FortiGate unit can process ICMP (ping), HTTP, FTP,
POP3, SMTP, and IMAP traffic. Until you configure probes, the FortiBridge unit
cannot detect if the FortiGate unit has failed.
Table 9: Internal network configuration
FortiGate management IP address 172.20.120.10/24
Internal network subnet IP address 172.20.120.0/24
Router internal IP address 172.20.120.1/24
Internal network default route 172.20.120.1
Primary DNS server 172.20.120.2
Secondary DNS server 172.20.120.3
Syslog Server IP address 172.20.120.11
SNMP Manager IP address 172.20.120.12
Mail Server Name mail.myorg.com
Table 10: Basic FortiBridge unit configurations settings
Administrator password passWORD
Management IP address 172.20.120.20/24
Default route 172.20.120.1
Primary DNS server 172.20.120.2
Secondary DNS server 172.20.120.3
Router
INT 1
INT 2
EXT 1
EXT 2
Internal External
Internal network
Syslog server SNMP Manager
Mail server
Internet
(Transparent mode)
(Normal mode)