Incorrect date and time, Server blade does not boot, 8 incorrect date and time – FUJITSU BX900 S1 User Manual

Page 81: 9 server blade does not boot

Text mode
Original mode

BX900 S1

Operating Manual

Troubleshooting and tips

7.8

Incorrect date and time

Set the time and/or date in the operating system or in the BIOS setup for the
relevant server blade.

If the time and date are repeatedly wrong when you switch on your
server blade, the lithium battery is flat. Change the battery as described
in the manual for the relevant server blade.

7.9

Server blade does not boot

The server blade does not boot after a defective hard disk drive was
replaced

Incorrect SCSI configuration (onboard SCSI HostRAID controller)

In the SCSI configuration menu, check the settings for the hard disk drives
(SCSI Device Configuration) and the settings under Advanced Configuration
Options.