FUJITSU BX900 S1 - Manual (Page 56)

56 Operating Manual BX900 S1
Installing the hardware
©
c
o g
n it as
. Ges
e lls
c h ft f
ü r
T e c hni
k -D
o k u m
e
nt
at
ion m
b
H 20
10
P
fa
d :
C
:\ P
rogra
m
m
e
\F
C
T
\t im
_a
pp
\t im
_l
o
c a l\ w
or
k \W
A
LT
E
R
\O
B
J _ D
O
K U
-4
9 4
9 -0
06
.f
m
4.6 Instructions for connecting/disconnecting
cables
V
CAUTION!
Please make sure you read the documentation for the devices before you
try to connect them.
Do not connect or disconnect any data transmission cables during a
thunderstorm.
Always pull cables out by the plug.
When connecting and disconnecting the cables, observe the following
order.
Connecting cables
Ê Switch off all the relevant devices.
Ê Unplug the power plugs of all affected devices from the power outlets or CEE
sockets.
Ê Connect all cables to the server and the peripherals. Secure the connectors
of the data cables (e.g. by tightening the screws).
Ê Plug all data transmission cables into the sockets provided for the data or
telecommunication networks.
Ê Plug all the power plugs into the power outlets or CEE sockets.
Disconnecting cables
Ê Switch off all the relevant devices.
Ê Unplug the power plugs of all affected devices from the power outlets or CEE
sockets.
Ê Pull all data transmission cables out of the sockets provided for the data or
telecommunication networks.
Ê Undo the screws on the connectors and pull the relevant cables out of the
system unit and peripherals.