Furuno FSV-30S - Manual (Page 57)

4-1
4. CONNECTING THE EXTERNAL
INTERFACE CS-120A
When upgrading from the CSH-20 series sonar, the External Interface CS-120A can be
used. Connect the CS-120A to the processor unit as shown on the next page. However, we
recommend that you connect external devices directly to the processor unit, to avoid signal
delay.
Install the following power supply kit (option) in the processor unit to enable use of the
CS-120A.
Name: Power Supply Kit Type: FSV-2403 Code No.: 000-067-013
Name Type Code No. Qty Remarks
Power supply pcb LEA50F-24-XFND 000-143-913 1
Spacer SQ-22 000-159-305-10 4
Protection sheet 10-071-3508 100-290-712 1
Screw M3 ×8 C2700W 000-163-190-10 4
Connector (NJC) NJC-203-PM 000-160-184-10 1
1. Unfasten seven screws to remove the front cover of the processor unit.
Screw
M4x8, 7 pcs.
DCON
FUR UNO
WARNING
Details
omitted
Processor unit, front view