Furuno FSV-30S - Manual (Page 50)

3-10
3.4.2 EXT DATA SETTING menu
EXT DATA SETTING
LOG PULSE : 200p/NM
MENU QUIT
QUIT
SPEED&COURSE : NMEA
HEADING : AD10S
DATE&TIME : CIF
SPEED SENSOR : GPS/DR
LAT/LON : NMEA
POSITIONING SENSOR : AUTO SEL.
WATER DEPTH : NMEA
WATER TEMP. : NMEA
WATER CURRENT : CIF
WIND : CIF
NET DEPTH : PULSE
EXT DATA SETTING menu
DATE & TIME
Choose the input format for data and time data. (NONE, CIF, NMEA)
HEADING
Choose the input format for heading data. (NONE, AD10S, CIF, NMEA)
LOG PULSE
Set the log pulse rate for the log signal. (200 p/NM, 400 p/NM)
SPEED & COURSE
Choose the input format for ship’s speed and course data. When choosing the
LOG&HEADING, the heading data is used instead of the course data.
(NONE, LOG&HEADING, CIF, NMEA)
SPEED SENSOR
Choose the input format for speed and course data. This setting is ineffective when
LOG&HEADING is selected as speed and course source.
(NONE, GPS/DR, DOPPLER/DR)
LAT/LON
Choose the input format for ship’s position data. (NONE, CIF, NMEA)
POSITIONING SENSOR
Choose the type of the navigator to use. For AUTO SEL., the priority is GPS/DR>LORAN-C.
(LORAN-C, GPS/DR, AUTO SEL.)