Fortinet FortiGate-5000 - Manual (Page 40)

FortiGate-5000 Series Introduction
40 01-30000-83466-20090108
Front panel LED FortiGate-RTM-XB2 system
Front panel LED
From the FortiGate-RTM-XB2 font panel includes a power LED.
Fabric backplane 10-gigabit communication
The FortiGate-RTM-XB2 module is used for fabric backplane 10-gigabit data
communication. To support fabric backplane communications your FortiGate-5140
or FortiGate-5050 chassis must include one or more 10-gigabit switch modules
(such as the FortiSwitch-5003A) installed in chassis slots 1 and 2. The
FortiGate-5020 chassis does not support fabric backplane communications.
Figure 17: Example FortiGate-RTM-XB2 configuration
Table 9: FortiGate-RTM-XB2 power LED
LED State Description
Power Green The FortiGate-RTM-XB2 module is powered on and properly
connected to a FortiGate-5001A board.
1
2
2
3
4
5
SMC
1
SMC
POWER
5050SAP
SERIAL 1 SERIAL 2 ALARM
10/100
link/Act ETH0 Service RESET ST A TUS Hot Swap link/Act ETH0
ETH1 10/100
5000SM 10/100
link/Act ETH0 Service RESET ST A TUS Hot Swap link/Act ETH0
ETH1 10/100
5000SM
Fabric Channel 2
10-gigabit Data
Communication
FortiGate-RTM-XB2
module installed in RTM
slot 3 provides two
10-gigabit fabric channels
and NP2 acceleration for
the FortiGate-5001A board
FortiGate-5001A Board
Installed in FortiGate-5050
front panel slot 3
Fabric Channel 1
10 Gigabit Data
Communication
Internal 10-gigabit
Network Connected
to Fabric Channel 2
External 10-gigabit
Network Connected
to Fabric Channel 1
Internal Network
External
Network