Physical description of the fortigate-5050 chassis, Figure 8, Shows – Fortinet FortiGate-5000 User Manual
Page 29
FortiGate-5050 chassis
Physical description of the FortiGate-5050 chassis
FortiGate-5000 Series Introduction
01-30000-83466-20090108
29
Figure 8: FortiGate-5050 chassis back panel
The back panel includes the FortiGate-5050 chassis ground connector which must be
connected to Data Center ground. Use the power wire fixtures for securing and managing
DC power wires. The FortiGate-5050 chassis also includes an ESD socket on the back
panel.
The back panel also contains 5 RTM slots numbered to correspond to the front panel
slots. The RTM slots are available for FortiGate-5000 RTM modules such as the
FortiGate-RTM-XB2 module. When the FortiGate-5050 chassis is shipped, these slots are
covered by RTM slot filler panels.
Physical description of the FortiGate-5050 chassis
The FortiGate-5050 chassis is a 5U chassis that can be installed in a standard 19-inch
rack.
Table 5
describes the physical characteristics of the FortiGate-5050 chassis.
5
4
3
2
1
-48V to -58V
(-DC in)
(black)
Power
wire
Ground
Connector
(green)
-48V to -58V
(-DC in)
(black)
Positive
(RTN)
(red)
Positive
(RTN)
(red)
DC VOLTAGE RANGE
-48V TO -58V
RTN (-DC IN)
INPUT B
25
AMP
DC VOLTAGE RANGE
-48V TO -58V
RTN (-DC IN)
INPUT A
25
AMP
ESD
k t
RTN
GND
RTN
-48V
-48V
RTM
slot filler
panels
Table 5: FortiGate-5050 chassis
physical description
Dimensions
8.75 x 17 x 15.5 in. (13.3 x 43.2 x 39.4 cm)
(H x W x D)
Weight
26.75 lb. (12.1 kg)
Operating environment
Temperature: 32 to 104°F (0 to 45°C)
Relative humidity: 5 to 85% (Non-condensing)
Storage environment
Temperature: -13 to 158 °F (-25 to 70°C)
Relative humidity: 5 to 95% (Non-condensing)
Power consumption
Maximum: 1,135 W
Power input
2x redundant -48VDC to -58VDC