FUJITSU M3099GH - Manual (Page 79)

7-8
Setting pre-pick
1 In Screen 2, press Mode 1 5 times to
display PREPICK SET screen.
2 Press Mode 2 to display Screen 19.
Select “ON” to set the pre-picking when
the document is fed. Each time
Mode 1 is
pressed, “ON” and “OFF” appear alter-
nately. The setting is stored in EEPROM
automatically.
3 Press Mode 2 to return to Screen 18.
When you close the setup mode press
Stop .
When you set the using of buzzer, you must set as follows:
Adjusting LCD contrast
1 In Screen 2, press Mode 1 6 times to
display LCD CONTRAST screen.
2 Press Mode 2 to display Screen 21. As
the number of “ ■ ” increases, the LCD
contrast gets darker.
3 In Screen 21, the LCD contrast is set to
one of the 16 steps. Each time Mode 1
is pressed, the number of “ ■ ” in-
creases. When all fields are filled by
“
■ ”, next pressing Mode 1 starts from all
“ ■ ■ ” (The lightest contrast).
4 Press Mode 2 to display Screen 20. The
settings are stored in EEPROM.
5 When you close the setup mode, press
Stop .
When you adjust the LCD contrast, you must set as follows:
< > < > S E T U P M O D E
R E P C K S E I T P
R E P C K S E I T P
O N
< > < > S E T U P M O D E
C O D C A S L T N T R
L C D C O N T R A S T
15-Chap. (7) 98.2.20, 10:57 AM 8