Connecting the interface cable – FUJITSU M3099GH User Manual
Page 33
2-5
(M3099EX/EH)
Connect the video interface and RS-232C interface cables and secure them with hooks and screws.
Connect the other ends to the host machine.
(M3099GX/GH)
Connect the SCSI interface cables and secure them with hooks and connect the other ends to the host
machine. When the scanner is at the terminal side, connect the terminator to the connector to which an
interface cable is not connected.
Catches
Screws
Interface cable
for video
Interface cable for RS-232C
Interface cable
for RS-232C
To the host machine
[ Back side of the scanner ]
Catches
Interface connector for SCSI
To the host machine
Interface cable
for SCSI
[ Back side of the scanner ]
NOTE
SCSI-ID is set to No. 5. Refer to Chapter 7 when changing the setting.
Connecting the interface cable
Interface connector
for video
05-Chap. (2)
98.2.20, 10:50 AM
5