FUJITSU M3099GH - Manual (Page 68)

6-4
How to select the print number reset method
You can choose whether to reset or not the print number when “HOPPER EMPTY” is detected.
How to reset the print number manually
You can reset the print number to the initial number using the operator panel.
R E S E T V A L U E
N o
0 0 0 0 1
- M o d e 1 Y e - M o d e 2 s
8 In Screen 1, press Mode 1 9 times to
display ENDORSER RESET METHOD
screen.
9 Press Mode 2 to display Screen 8. Press
Mode 1 to display “ON” or “OFF”. Each
time you press Mode 1 , “ON” and “OFF”
appear alternately. Select “ON” to reset
the print number when “HOPPER
EMPTY” appears and select “OFF” not to
reset. The setting is automatically stored
in EEPROM.
10 Press Mode 2 to return to Screen 7.
Go to 7 to close the job.
11 In Screen 1, press Mode 1 10 times to
display ENDORSER RESET screen.
12 Press Mode 2 to display Screen 10 where
“OFF” and the current print number are
displayed.
If you want to reset the number, press
Mode 2 . And you can see Screen 11 for 3
seconds. If you do not want it, press
Mode 1 to go Screen 9.
Go to 7 to close the job.
< > < > S E T U P M O D E
E N D O R S E R R E S E T M E T H O D
O P - E M T Y R E S H E T P
O N
< > < > S E T U P M O D E
E N D O R S E R R E S E T
R E S E T i n i s h 0 0 0 0 1 F ! !
13-Chap. (6) 98.2.20, 10:54 AM 4