FUJITSU M3099GH - Manual (Page 65)

6-1
Specifications
This section describes the specifications of the endorser.
Refer to Reference Guide about information on adjusting the print head position and replacing the print
head.
The following table lists the endorser specifications.
Item Specification
Printing method Ink jet printing method
Characters Alphabet : A to Z, a to z
Number : 0, 1, to 9
Symbol : ! “ # $ % & ‘ ( ) *
+ - . / : ; < = > ?
@ [¥] ^ _ -{|}
(blank)
Maximum number 20
of characters
Character size 2. 9 x 1.5mm
(0.11 in x 0.06 in)(height x width)
Character pitch Approx. 2.54 mm (0.1 in)
Print area Back-side of the document
A
≥
5 mm (0.2 in)
B
≥
28 mm (1.1 in)
C
≥
20 mm (0.79 in)
D
≥
5 mm (0.2 in)
Center of the
document Read reference
position
Feed direction
ABC ••••• ST
B A
C
D
Back side
13-Chap. (6) 98.2.20, 10:54 AM 1