FUJITSU M3099GH - Manual (Page 76)

7-5
3 If you press the Mode 2 at Sccreen 9,
you return to screen 8.
The setting is stored to EEPROM.
If you press the
Mode 2 at screen 10,
you go to screen 11. (Screen 12 in case
of M3099GH/GX)
4 If you press the Mode 1 at screen 11/12,
IPC-2 pre-set mode can be not used.
Also the setting is changed to “No”
obligatory and stored to EEPROM. If
you press the
Mode 2 at screen 11/12,
IPC-2 pre-set mode can be used and the
setting number is stored to EEPROM.
When you close the setup mode, press
Stop .
N o - M o d e 1 Y e s - M o d e 2
P a n e l / H o s t S e t I g n o r e
X
I P C - 2 S E T
Background density
Normal ← → Dark
Normal
↑
↓
Light
q : Normal background
and character.
w : Normal background
and light character.
Background color
Red Green Blue
r : Light character
on red paper.
e : Dark background
and normal-density
character.
t : Light character
on green paper.
q - t are the pattern number set in setup mode.
Character
density
User’s paper are classified in line-art scanning as follows:
The horizontal axis shows the background density/color of paper.
The vertical axis shows the density of charcter/ line.
N o - M o d e 1 Y e s - M o d e 2
H o s t S e t I g n o r e
15-Chap. (7) 98.2.20, 10:56 AM 5