HP XE3 - Manual (Page 68)

2-40 Removal and Replacement HP OmniBook XE3
Removing Notebook Components
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
•
Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove the assemblies and follow the additional steps given in the table below.
Table 2-1. Removing Notebook Components
Component Removal Procedure Additional Steps
Case, bottom See page 2-34.
Case, top See page 2-19.
Cover, keyboard See page 2-9.
CPU module See page 2-29.
Display assembly See page 2-17.
Doors, docking Mini-PCI card (page 2-7).
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Hard disk drive assembly
(page 2-13).
Display assembly
(page 2-17).
Top case assembly
(page 2-19).
Hinge saddle set
(page 2-22).
Video PCA (page 2-25).
Heatsink assembly
(page 2-25).
CPU module (page 2-29).
Floppy disk drive assembly
(page 2-31).
CD-ROM/DVD drive
(page 2-33).
Motherboard (page 2-34).
See the figure on page 2-38.