HP XE3 - Manual (Page 59)

HP OmniBook XE3 Removal and Replacement 2-31
Removing the Floppy Disk Drive
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
•
Keyboard cover (page 2-9).
•
Keyboard (page 2-11).
•
Display assembly (page 2-17).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
2. Release the drive’s ribbon cable from its connector on the motherboard.
3. Remove the two retaining screws.
4. Lift the floppy drive out of the notebook.