Electrical specifications, Power, Power management – HP DVD100I User Manual
Page 24: Power input, Power consumption, Front audio output, Ground tab, Tray locking mechanism, Connectors and jumper block, P. 24
hp dvd-writer
hp dvd-writer
hp dvd-writer
hp dvd-writer
dvd100i
dvd100i
dvd100i
dvd100i
Technical Support Solutions Guide 10/25/01
Electrical Specifications
24
24
24
24
Electrical Specifications
Power
Table 14
Table 14
Table 14
Table 14
Connectors and Jumper Block
Power Management
Power Management
Power Management
Power Management
The drive is Energy Star compliant.
Power Input
Power Input
Power Input
Power Input
The internal PC power supply for the drive is:
■
5 VDC with +/-5% tolerance, +12 VDC with +/-10% tolerance
Power Consumption
Power Consumption
Power Consumption
Power Consumption
The amount of power used by this drive is 25 Watts, maximum.
Front Audio Output
The front audio output is an industry-standard stereo mini type.
Ground Tab
The ground tab is an AMP FASTON terminal 61761-2 or its equivalent.
Tray Locking Mechanism
There is a locking mechanism on the tray such that when power is off and the tray is
closed, the tray will be locked in a closed position. This locking mechanism has a
manual override.
Connector
Description
DC Power Inlet
4 pin Amphenol
Audio Output
4 pin per MPC-2 spec. (rear of drive)
1V typical RMS output voltage
3.5 mm Headphone Jack (front of drive)
0 to 3.5V RMS output voltage
Signal Connector
40 pin ATA-2 dual row header, shrouded & keyed
Rear Jumper Block
ATAPI ID selection (Master, Slave, CSEL)