Hand Held Products DOLPHIN 9500 - Manual (Page 61)

Terminal Setup
Sending Program Files to the 7400/9500 Terminal
1. Cold boot the inal.
2. On the terminal, click on
Enter
.
3. Double-click on the
My Computer
icon
4. Double-click on the
IPSM
icon.
5. Select the
Twin Client
folder.
6. Choose
Delete
the
File
menu.
7. Choose
Yes
at the prompts.
8. Cold boot the terminal.
9. Click
Enter
.
10. Go to
Start
,
gs
, and
Control Pa
11. Double-click on the
Communication
icon.
12. Select the
PC Connection
tab .
13. Chose a baud rate of Direct 115200 when using the terminal with the cable, and
choose a baud rate of
Infrared 57600
when using the terminal in the cradle.
14. Go into
Tweak Activesync
(an Hand Held Products utility) on the PC.
15. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you ar
ng a cable with the t
term
.
from
Settin nel
.
e usi erminal.
16. Click on
Close Activesy c lick on
Open A nc . nc , then
ctivesy
Supported Equipment Manual
• January, 2006 2-51