Hand Held Products DOLPHIN 9500 - Manual (Page 21)

Terminal Setup
The display expands to show the default terminal group. Next, click on the
New Group
icon and use the
Browse
button to select the configuration file saved earlier.
Check the
Active
box, and the system is now configured to automatically download IP
addresses, software, and configuration files to the terminals. Click on the box in the
upper right corner to return to the main menu.
Note:
The software does not need to be authorized now. It can be authorized later, after a
Telnet session has been established. The procedure is described in the section
entitled Authorizing PowerNet.
Supported Equipment Manual
• January, 2006 2-11