Hand Held Products DOLPHIN 9500 - Manual (Page 55)

Terminal Setup
Sending Configuration Files to the 7400/9500 Terminal
rminal.
.
n the icon.
6. C n using the terminal in the cradle or a
baud rate of
Direct 115200
when using the terminal with the cable.
7. Click on
OK
.
8. Close the screen.
9. Go into
Tweak Activesync
(an Hand Held Products utility) on the PC.
10. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you are using a cable with the terminal.
1. Cold boot the te
2.
Click
Enter
.
3. Go to
Start
,
Settings
, and
Control Panel
on the terminal
4. Double-click o
Communications
5. Select the
PC Connection
tab.
hoose a baud rate of
Infrared 57600
whe
11. Click on
Close Activesync, then click on Open Activesync.
Supported Equipment Manual
• January, 2006 2-45