Hand Held Products DOLPHIN 9500 - Manual (Page 113)

Error Message Resolution Guide
Message Reason Solution Reference Tech Note
ost\nlist from Server; ocol detected. d cabling, power
or faulty transceiver. Also, will receive
this if the Mobile Unit is in the wrong
ration.
Unexpected Server\ndata received; Bad Protocol detected. a result of bad cabling, power
or faulty transceiver. Also, will receive
it is in the wrong
Error starting\nhost application; Connected to the server but cannot
connect to the distant end. Configure the server handler to access
the host application. ---
Select Host or App; Need to choose your
Host/application destination. User selection required. ---
Connecting...; Attempting to connect to the
Host/application. Advisory message. ---
TCP Error\nReading IP
Address\nREBOOT MOBILE UNIT; Mobile Unit missing Network IP
information. Configure the Mobile Unit with the
correct network IP information. ---
Printer start error; Could not initialize the printer.
Cable or power issue with the printer. ---
Battery too low\nto print; Not enough power to print. Replace the battery with a fully
recharged battery. ---
Paper Feed Error\nFix Then Hit Enter; inter is not ready.
paper in the printer.
Printer Error\nPrint Ended; int.
settings and paper in the printer.
Error receiving h Bad Prot Usually a result of ba
mode for server ope
Usually
---
this if the Mobile Un
mode for server operation.
---
Replace the paper or rethread the
Paper in the pr
Check cable, battery, communication
---
Can not pr ---
Supported Equipment Manual
• January, 2006 4-5