Hand Held Products DOLPHIN 9500 - Manual (Page 60)

Terminal Setup
19. Choose OK.
20. Click on
OK
.
21. Cold boot the terminal.
22. On the terminal, select the
Specify an IP Address button.
23. Enter the IP A r
, Subnet Ma and Default Gateway.
24. Click on OK.
25. Go to Start, Programs , Cisco , and Client Utility.
26. Select
SSID
and its Value .
27. Click on OK.
28. Go to Start , Pr g s
, Cisco , an
lient Util ty
29. Select World Mode , and change the Value to Disabled.
30. Click on OK.
31. Warm boot the terminal. To perform a warm boot, press and hold the
CTRL
and
SFT
keys for about 10 seconds, then release.
dd ess sk
,
o ram
d C i .
2-50 Supported Equipment Manual
• January, 2006