NewTek TalkShow VS-100 - Manual (Page 95)

Page | 87
It’s important when planning your installation to provide adequate
support for the unit’s weight, and pay particular attention to
providing room for both cable access and adequate ventilation. This
section provides physical dimensions and recommendations intended
to inform and guide you when mounting TalkShow™ systems and
related control surfaces.
FIGURE 75
Physically, TalkShow comprises a 1RU (1 Rack Unit) enclosure designed for mounting in
standard 19” rack architecture. The units weigh roughly 14 pounds (6.35 KG). A shelf
or rear support can help distribute the weight evenly on front and rear vertical members
when rack-mounting the unit (NewTek™ can also supply optional side-rails).
Good rear access is important for convenience in cabling. In view of the positioning of
air vents at the rear of the chassis’ upper panel, allow sufficient space above each unit
systems to ensure adequate cooling (ideally, one RU or more).