NewTek TalkShow VS-100 - Manual (Page 29)

Page | 21
7. Locate and click the Video (camera) icon at the top of the Skype TX settings pane
(Figure 16) to populate the settings panel with video options.
FIGURE 16
Notice that there is an SDI frame rate menu in the settings group labeled Output. This
important setting determines whether TalkShow’s video hardware runs in PAL or NTSC
mode, and other options will update as required based on your selection here.
FIGURE 17
8. Select either 29.97, 59.94 or 30 fps for NTSC, or alternatively, 25 or 50 for PAL.
Note: If SDI video input or output does not seem to be working, check this setting. If incorrect, all
you will see is black.
We’ll discuss other settings in this pane later, but for now let’s continue by setting up
the video signal we will return to the remote Skype™ caller.