NewTek TalkShow VS-100 - Manual (Page 69)

Page | 61
It doesn’t seem necessary to slay another virtual tree and waste pixels to reiterate the
foregoing, so let’s do the ‘green’ thing and move on, shall we? 
Just as incoming Skype™ Call video is simultaneously supplied to TalkShow’s SDI Out and
Network outputs, likewise audio output goes to all outputs at the same time. This
includes, then, the following:

SDI embedded audio

TalkShow™ Network output

XLR audio outputs
A UDIO B ASIC
To view the basic configuration options affecting Call audio, click the Skype TX™ Settings
button (gear) at upper-left (if necessary), and then click the Audio Settings button (which
looks like a speaker – Figure 60) at right.
FIGURE 60
For most purposes, the Preview device and Delayed Device settings should be configured
as shown in Figure 61. (The alternative audio devices are intended for other Skype TX
use, and not appropriate for TalkShow applications.)
Disable AGC works as explained previously, in Section 6.1.2.