Maintenance, 1 introduction – Adept Python User Manual
Page 153
Adept Python Modules User’s Guide, Rev. E
153
Maintenance
11
11.1 Introduction
gives a summary of the preventive maintenance procedures and guidelines on
frequency.
NOTE: The frequency of these procedures will depend on the particular
system, its operating environment, and amount of usage. Use the times in
as guidelines and modify the schedule as needed.
Table 11-1. Inspection and Maintenance
Item
Period
Reference
Check E-Stop, enable and key switches, and barrier
interlocks
6 months
See
Check mounting bolts on all modules and brackets
6 months
Clean the heat sink fins on all MB-10s
1 month
Track the usage on the encoder battery and replace when
required.
varies
See
Track the usage on the MB-10 internal battery and replace
when required.
varies
See
WARNING:
The procedures and replacement of parts
mentioned in this section should be performed only by
skilled or instructed persons, as defined in
.