AltiGen MAXCS 7.5 Softswitch Deployment Guide - Manual (Page 7)

MAXCS 7.5 All-Software Solution Deployment Guide Page 7 of 37
 AltiConsole license
 CTI Integration Connector Seat license
 Call Recording Session and Seat licenses
 SIP Trunk license
 Third Party SIP Device license

VRmanager license
 MaxInsight Session license

Client Application SDK Session license

Trunk Control APC SDK Session license

SightMax Integration license

Salesforce Connector license
 Polycom Advanced Features license
Licenses Not Available
The following licenses are not available for the MAXCS All-In-One Softswitch Solution.
• IP Gateway Expansion licenses (ALTI-GWEXP-01).
• AltiStation licenses (you must use either a SSW-STATION stand-alone license or a SSW-
BASECOMBO-STD license instead).
• ACM-SEAT500 (you must use either a SSW-ACMAGENT stand-alone license or a SSW-
ACMCOMBOAGENT license instead).
Minimum Requirements
• Dedicated Windows Server 2012 R2, Window 7 64-bit SP1, or 2008 R2 SP1 Standard running on a 64-bit,
Quad-core Intel @2.5GHz, 4GB memory, 160GB hard drive, or, for a virtual environment, VMware ESX 5.5
or Hyper-V 6.1; allocate 4 Intel cores @ 2.0GHz each, 4GB memory, and 160GB hard drive
• The server must pass the tests in the HMCP Certification Tool; see Step 1: Run the HMCP Certification
Tool on page 8.
IMPORTANT:
• Make sure the server has the recommended Windows Service Pack and/or updates.
• The server must already be a member of the Active Directory Domain.
What Is HMCP?
HMCP stands for Host Media Control Processing, a virtual component that uses an Intel CPU to provide the
following functions:
Process VoIP media stream
• Encode, decode, and transcode voice streams
• Detect and generate tone for IP devices
• Play music when a device is on hold
• Process IP paging